Maintenance/Care Guidelines

With Canada’s largest team of certified technicians we provide the industry’s best design/installation/maintenance/service on all  Vehicle Fire Suppression Systems. Contact us for a complimentary quote.

Levitt-Safety is an factory authorized distributor for all of the major vehicle fire suppression system manufactures including:

  • Ansul
  • Kidde
  • Amerex
  • Fogmaker

Maintaining the best quality output from these systems requires regular inspection by factory certified technicians and keeping up to date with the frequency of maintenance needed.

Daily (Customer)

Vehicle operator is to check the system daily by verifying that the GREEN LED light is flashing and no other LED are illuminated. There should be no audible alarm sounding. Check gauge on Kidde and Amerex systems.

Monthly (Customer)

Visually inspect every 250 operating hours or monthly following approved schedule necessitated by conditions using operating manual.

Semi-Annual / 1000 Operating Hours

As per NFPA 17 and the Ansul A101/Kidde KVS and Amerex VSS Manuals, carry out maintenance procedure of the dry chemical system every six months or 1000 operating hours, whichever comes first.


Replace control module battery and date new battery.

Every Five Years

Replace squib every five years as per operating manual. Hydrostatic test cartridges as required (cartridges marked with [*] require hydrostatic test every 10 years).

Every Six Years (Kidde and Amerex Vehicle Suppression Systems)

As per NFPA 17, perform a six year internal inspection of the agent and cylinder.

Every Twelve Years

Conduct hydrostatic testing of agent cylinders as required (NFPA 17).

Get in touch with us today to request your quote or book your service.

  What can we help you with?
  Send Us Feedback