Haws® AXION® 9201E Emergency Tempering Thermostatic Mixing Valve, 1/4 in Nominal, FNPT End Style, 125 psi Pressure, 1 to 31 gpm Flow, Brass Body
Part #BH9201E
$2,218.95 / Each
Model 9201E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The modular brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (26 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 95 deg F (16 - 35 deg C). Maximum inlet temperature: 180 deg F (82 deg C). Recommended inlet temperature: 140 deg F (60 deg C). Minimum inlet temperature: 120 deg F (49 deg C) Inlets 1-1/4 in FNPT. Outlet 1-1/4 in FNPT.
Item Features
- AXION®'s superior design and technology provide a complete safety solution for increased victim comfort
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Extended warranty
- Fully assembled
- In-line strainer
- Internal check stops
- System certified
- Thermostatic protection
Description
Model 9201E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The modular brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (26 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 95 deg F (16 - 35 deg C). Maximum inlet temperature: 180 deg F (82 deg C). Recommended inlet temperature: 140 deg F (60 deg C). Minimum inlet temperature: 120 deg F (49 deg C) Inlets 1-1/4 in FNPT. Outlet 1-1/4 in FNPT.
Item Features
- AXION®'s superior design and technology provide a complete safety solution for increased victim comfort
- Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
- Wax based thermostat technology for fast response time with proven highly reliable temperature control
- Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
- Modular brass design with internal check stops
- Over-sized valve seats resist failures caused by foreign matter
- A new and efficient shuttle design eliminates valve sticking
- A custom funnel design improves temperature control at low flow rates
- Extended warranty
- Fully assembled
- In-line strainer
- Internal check stops
- System certified
- Thermostatic protection
Specifications
- BrandHaws®
- Body MaterialBrass
- Dimensions7-5/8 in L x 3-1/2 in W x 5-3/8 in H
- End StyleFNPT
- Flow Capacity1 to 31 gpm
- MediaHot/Cold Water
- Nominal Size1/4 in
- Pressure Rating125 psi
- Temperature Rating85 deg F
- TypeEmergency Tempering