NLT© Genesis Cordless Cap Lamp with Li-Ion - With Fixed Clip, 7,000 Lux Output
$569.74
/ EachNLT’s line of Smart Lamps debuted with Genesis, the world’s first cordless cap lamp to accommodate a tracking tag. For use in the harshest environments, the intrinsically safe (IS), all-in-one Genesis cap lamp has the capacity to accommodate a variety of tracking tag options while keeping the battery and light source in a single high-impact, IP67 enclosure. Its innovative engineering makes it programmable, with custom functionality to support 3rd-party solutions, as well as customizable for bidirectional communication.
Genesis is available in MSHA, IECEx / ATEX, ANZEx and non-certified models as a tag-ready, standalone lamp and certified MSHA IS with Extronics / AeroScout tracking tags. This cap lamp is an ideal choice for mines looking for a cordless lamp today with plans to introduce tracking in the future. Since the launch of the Genesis cap lamp, NLT has worked with tracking and proximity providers around the world to fit their tags into our all-in-one design.
The battery and all components of the Genesis are serviceable, increasing the life of the lamp, lowering the total cost of ownership and ultimately reducing waste. Check with your authorized NLT distributor or NLT for service or training.
-
- Tracking-tag or proximity-tag enabled: Tags are primarily used for location tracking of personnel and access control. A key benefit is pinpointing the location of miners during an emergency. Proximity tags are used for worker safety.
- Tag is powered by the lamp: Once installed into the NLT lamp, there is never a need to change the tag battery. The Genesis lamp provides optimum power for the tag.
- Bidirectional communication: Limited bidirectional capability is enabled through the push button on the headpiece. This button is used for a variety of functions, including (but not limited to) emergency assistance (man-down) requests, acknowledging a signal/warning or triggering a warning/alarm.
- Programmable cap lamp lights: The fully programmable cap lamp light can be used for a variety of notifications, including safety or operational alerts, e.g., for a man-down or evacuation signal, it can flash in a pre-programmed sequence. It can also be used to signal shift change or report-to-surface instructions.
- Integrated: By having the tag integrated into the cap lamp, the tag will not get left behind. Having the tag always on the miner is a very important safety consideration.
- Brand: NLT Inc.Brand: NLT©Battery Charge Time: < 10 hoursCharger Power Source: 120V or 240V modelsCharging Temperature: 5°C to 35°C (optimum 15°C to 20°C)Charger Configuration: Single, 4, 10, 24 and 48-unit rack; 12 VDC model for vehicle connectionApprovals: Intrinsically Safe approved by ATEX, IECEx, MSHA.Battery Capacity: 14 Hours on Main LED, 7 Days on Low-Light/Emergency LEDCharging Time: < 10 HoursClip: FixedColour: OrangeLight Output: 7,000 LuxRun Time: Low-Light/Emergency LED > 7 days, Main LED > 14 hoursWeight: 188g (6.6 oz), 188g (6.6oz)