Ion Science Tiger XT Select VOC PID Gas Detector - PPB, For Benzene & Total Aromatic Compounds, with a 10eV Sensor, PPB/H&S/Data Logging
Part #:ISTXSXSLBMP0519
Estimated delivery is 7-14 days. We’ll notify you if longer.
$13,097.70
/ Each QTY
The Tiger XT Select portable benzene PID gas detector, displays real-time data, ensuring the final reading represents the full value of actual benzene gas present. Benzene gas concentrations are displayed down to parts-per-billion (ppb) levels, giving you accurate, reliable data you can count on.
The Tiger XT Select can also be used in ‘standard Tiger operational mode‘ without the use of a benzene pre-filter tube to deliver active indications of volatile organic compounds (VOCs), including benzene, at concentrations as low as 1 ppb benzene equivalent.
This gas detector has a thermo plastic elastomer outer moulding, this rubber material is semi-conductive making the Tiger XT Select intrinsically safe.
-
- Improved robust design can withstand harsh environments
- Large internal gas table with over 750 VOCs & toxic compounds
- IP65 ingress protection against a range of weather conditions
- <2 second response time, one of the fastest and most accurate on the market
- Instantaneous alarms, RED & AMBER with loud 95 dBA sounder
- Humidity resistant and anti-contamination design ensures optimal performance
- Brand: Ion ScienceApprovals / Standards: 3193491 conforms to UL Std. 913, 61010-1 & Certified to CAN/CSA std. C22.2 No. 61010-1, Class 1 Division 1. Approval for Groups A, B, C & D, T4, IECEx ITS 22.0025X ITS-I22ATEX35111X, II 1G Ex ia IIC T4 Ga, ITS22UKEX0635X, Tamb = –25 °C ≤Ta ≤+40 °C (with alkaline battery pack), Tamb = –25 °C ≤Ta ≤+45 °C (with lithium ion battery pack)Alarm: Flashing LEDs Amber (low alarm) Red (high alarm), Pre-programmed TWA and STEL, Sounder 95 dBA at 300 mm (12″), Vibration on alarmProtection: Designed to IP65, EMC tested E613261:2013, EN50270:2015 & CFR 47:2008 Class AWeight & Dimensions: 370 mm (H) x 91 mm (W) x 60 mm (D), 870gLamps: 10.0 eV Krypton PID lampMaximum Sensitivity PPB Model: Standard running mode 0.001 ppm, TAC 0.001 ppm, Tube mode 0.01 ppm (res. 0.001 ppm)Communication: Direct USB 1.1Calibration: 2 and 3 points calibration (via calibration kit accessory)Humidity: 0 – 99 % RH (non condensing)Battery Life: Alkaline: 3 x AA, typically 8.5 hours life, Li-ion: life up to 24 hours, charge time 8 hoursFlow Rate: ≥ 220 ml/min (with blocked flow alarm)Response Time: 130 seconds at 20 °C (variable) progressive indication of benzene breakthrough is displayed in real time