• Lockout/Tagout: Put a Lock on Hazardous Energy Online Course

    Register TodayLOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY COURSE OVERVIEW

    OSHA’s Control of Hazardous Energy standard (29 CFR 1910.147) mandates training, inspections, and recordkeeping to ensure that workers will not be injured by unexpected start-up or release of energy from a machine or piece of equipment during service or maintenance.

    Whatever your role in lockout/tagout, you need to understand the reasons for lockout/tagout and know the established procedures. Lockout/Tagout: Put a Lock on Hazardous Energy is designed to raise your awareness about the importance of lockout/tagout and teach you both when and how to follow the procedures every time they’re needed.

    After completing this course, learners will be able to:

    • Identify sources of hazardous energy
    • Describe the three different types of employees recognized in a lockout or tagout program
    • Distinguish lockout from tagout
    • Explain how to perform lockout and tagout procedures
    • Use a group lockout device safely
    • Recognize exceptions to lockout and tagout requirements

    LOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY COURSE TOPICS:

    • Control of Energy
      • Hazardous Energy
      • How Accidents Happen
      • OSHA Regulations
      • Who is Involved
    • Lockout Basics
      • Definition
      • When to Use Procedure
      • Steps: Apply Lockout
      • Steps: Remove Lockout
      • Lock Requirements
    • Tagout Basics
      • Definition
      • When to Use Procedure
      • Steps: Apply Tagout
      • Steps: Remove Tagout
      • Tag Requirements
    • Special Cases
      • Group Lockout & Group Tagout
      • Shift Change
      • Vehicle Lockout/Tagout
      • Exceptions
      • Authorized Person is Unavailable

    LOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY COURSE DURATION

    Approximately 60 minutes

    LOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY TESTING

    Testing conducted in this online Lockout/Tagout: Put a Lock on Hazardous Energy course is designed to reinforce the information presented. A mark of 80% must be achieved in order to receive a certificate of completion. Users are able to repeat the course twice if the pass mark is not achieved.

    LOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY CERTIFICATE OF COMPLETION

    Upon successful completion of this online course, a certificate of completion will be available to download and print.

    LOCKOUT/TAGOUT: PUT A LOCK ON HAZARDOUS ENERGY COURSE PREVIEW


Comments are closed.

X