Jonathan McCallum

Market Segment Manager: Occupational Health, Industrial Hygiene & Environmental Monitoring

What is fit testing and why should I care?

November 21st, 2019

Do you wear a respirator for work? Were you fit tested for it? If you haven’t been, you should be! A respirator fit test...

Read More

Michael Douglas

National Manager, Marketing Segments

The Ultimate Beginners’ Guide to Chemical Safety

July 16th, 2019

My post today is short and sweet – not because I don’t have much to say about chemical safety, but because all the...

Read More

Nataly Carbone

Marketing Programs and Events Manager

3 Reasons Why You Should Clean and Maintain Your SCBA

April 22nd, 2019

Cleaning and maintaining your life-saving equipment is never superficial. Whether your SCBA hangs on the wall ready to be used in an emergency...

Read More

Nataly Carbone

Marketing Programs and Events Manager

5 tools anyone new to the mining industry should understand

April 15th, 2019

A large portion of the work we do is in the mining and resource sector. By its very nature, underground mining presents a...

Read More

Julie McFater

Director of Marketing

Try before you buy: why more companies are opting to rent safety equipment

February 25th, 2019

John Lindsay likes helping people who are in a pinch. “I operate off the seat of my pants, but I never fail to...

Read More

Jonathan McCallum

Market Segment Manager: Occupational Health, Industrial Hygiene & Environmental Monitoring

Your ultimate cheat sheet for Respirator Fit Testing

February 13th, 2019

We recently published the ultimate cheat sheet for the new CAN/CSA-Z94.4 respiratory protection standards which gives a great high-level look at the Standard’s...

Read More

Michael Douglas

National Manager, Marketing Segments

Can workers refuse “uncomfortable” respirators? New CSA standard says yes.

December 19th, 2018

“Respirator comfort is an important factor in wearer acceptance. Respirators with greater wearer acceptance are more likely to be worn appropriately.” — CAN/CSA-Z94.4-18 As...

Read More

Michael Douglas

National Manager, Marketing Segments

Your Ultimate Cheat Sheet for the new CAN/CSA-Z94.4 Respiratory Protection Standards

December 11th, 2018

The fifth edition of CAN/CSA-Z94.4 came out in September and I’ve been getting questions about what exactly these changes mean for workplace respiratory...

Read More

Jonathan McCallum

Market Segment Manager: Occupational Health, Industrial Hygiene & Environmental Monitoring

What is Spirometry and Why Does it Belong in the Workplace?

November 26th, 2018

There are a ton of occupational hazards that we encounter each day as we help evaluate worksites. But, lucky for us, we live...

Read More

Michael Douglas

National Manager, Marketing Segments

Welding: The Cancer Risk No One Thinks About

October 30th, 2018

Substantial new evidence shows welding fumes and UV radiation from welding are actually Group 1 carcinogens The International Agency for Research on Cancer (IARC)...

Read More

Michael Douglas

National Manager, Marketing Segments

Cartridges or Filters? Here’s how to find out what works best for your job

September 18th, 2018

First, I’ll start by saying that using the right respirator cartridge is just as important as using the right respirator. Respirator filters are made of...

Read More

Jonathan McCallum

Market Segment Manager: Occupational Health, Industrial Hygiene & Environmental Monitoring

How to Pass a Respirator Fit Test

May 8th, 2018

In one of our recent blogs, we explained the different types of respirator fit testing (quantitative and qualitative) and why they’re such a...

Read More
  Subscribe
  What can we help you with?
  Send Us Feedback